1. Before beginning, ensure the right speaker is fully charged. The right speaker will be labeled with an “R,” and it is a battery powered speaker.
   • The red LED will be on while charging and will go off when fully charged
2. If the right speaker is not charged, plug in the USB-C cable, and connect the speaker to a power source.
3. Plug an RCA cable into the left main-powered speaker
4. Connect the other end of the cable into your preferred audio device
5. Switch on the left (main-powered) speaker.
   • For RCA connections – press the power button twice to select RCA.
   • You will see a purple LED light when the speaker is in RCA mode.
6. Switch on the right (battery powered) speaker making sure that it is in Bluetooth mode
   • Once the LED light is flashing blue, that means it is ready to pair
7. If the speakers have never been paired before, follow the steps below. If they were already paired, proceed to the next step.
   • On the left speaker, press and hold the Bluetooth button until you hear a beep
   • Once you hear a beep, that means the speaker is looking to pair with the right speaker
8. The speakers will be paired when you hear an announcement that says “left channel, right channel”
9. Start playing audio from your device

Watch Full Troubleshooting Video Here: https://www.youtube.com/watch?v=I9neWohxvyY

1. Ensure the speakers are plugged in and the right speaker is fully charged. The right speaker will be labeled with an “R”, and it is a battery powered speaker.

   • The red LED will be on while charging and will go off when fully charged

   • If the right speaker is not charged, plug in the USB-C cable and connect the speaker to a power source.

2. To pair your speakers, plug the power adaptor into the left (mains-powered) speaker and switch it on by pressing and holding the power button for 2 seconds

3. Switch on the right (battery-powered) speaker

4. In a few seconds, the two speakers should pair together automatically

5. When paired, the speakers will announce “left channel” and “right channel”

   • If the speakers don’t pair in 10 seconds, press, and hold the Bluetooth button on the left (mains-powered) speaker for 5 seconds until you hear a beep

   • The second LED light will flash red and blue while the speakers pair together

   • The speakers will then announce, “left channel” and “right channel”

6. They are now ready to pair with your Stir It Up Wireless turntable

7. Turn on the Stir It Up Wireless by selecting the desired speed

8. Press the Bluetooth button to start pairing

9. When paired, the blue LED light on the turntable will stop flashing

10. If the speakers do not pair within 5 seconds, press the Bluetooth button again

11. Begin playing a record and enjoy!

Note: to play different audio on each of your Get Together Duo speakers, you will need to play audio to one speaker with an AUX or RCA connection and the other speaker with a Bluetooth connection.

1. 1. Ensure the speakers are plugged in and the right speaker is fully charged. The right speaker will be labeled with an “R”, and it is a battery powered speaker.
      • The red LED will be on while charging and will go off when fully charged
      • If the right speaker is not charged, plug in the USB-C cable, and connect the speaker to a power source.
   2. Connect an AUX or RCA cable to the left speaker and to the device you would like to play music from
   3. Switch the other speaker into Bluetooth mode by clicking the Bluetooth button on the speaker.
   4. Go into your device’s Bluetooth settings and click on “Get Together Duo x2”
   5. When the pairing request pops up, press “Pair” on your device
   6. Your device will now be connected to the “Get Together Duo x2”
   7. Begin playing audio from your devices and enjoy!

• • You can charge the Get Together Duo with the provided A-C Micro USB charging cable.  

• • 5200mAh

• • 6.8lbs (3.1kg)