Purchase Wireless Bluetooth Turntable Online

If you're using your Stir It Up Lux turntable for the first time, follow the steps below for quick and easy set-up, or watch this video

a.    Attach the drive belt

Note: The drive belt comes pre-installed. However, if when you open the turntable there is no visible belt around the sub-platter and motor, please refit the belt following the steps below.

1.      Put the belt on the motor (this is the gold spindle), then keep the belt tight stretch it around the sub-platter. Once in place, make sure the belt is flat and not twisted.

2.    Now place the glass platter on the black sub-platter by aligning the center holes.

3.    Now place the slip met on the glass platter, again aligning the center holes. The platter should be attached to the base.

b.    Balance the tonearm

Option 1 (Without Stylus Pressure Gauge)

1.      Push the Balance Weight on the tone arm until you feel a click.

2.    Remove the stylus needle cover before attempting to balance the tonearm.

3.    Unclip the tonearm from its rest and make sure it is floating freely.

4.    Rotate the Balance Weight back and forth until the tone arm is parallel with the platter

5.    Now place the tonearm back into its rest and clip it in so it is secure.

6.    Now add the correct tracking force for the stylus. You can do this by rotating the whole balance weight counter clockwise until the correct weight is added. The correct tracking force for this stylus is 1.5g - 2.5g (2g is standard).

7.    Note: Once finished, if you’re not using the turntable to play a record, put the stylus needle cover back on to protect the stylus when not in use.

Option 2

1.      Push the Balance Weight on the tone arm until you feel a click.

2.    Remove the stylus needle cover before attempting to balance the tonearm.

3.    Unclip the tonearm and from its resting position make sure it is floating freely.

4.    Place the stylus onto the 2-gram mark (recommended Tracking Force for our stylus).

5.    Rotate the balance weight back and forth until the pressure gauge is level. Ensure that the needle stays on the 2g mark.

a.    Make sure the Stir It Up Lux is connected to the power adapter and a wall outlet, and the outlet is switched on.

b.    Put a vinyl on the turntable.

c.    Make sure the stylus needle cover is removed.

d.    Turn the RPM dial to the correct speed for the record. E.g., 45/33

e.    If you want to play via Bluetooth -please see the “Bluetooth Pairing” section and then come back to this step once connected to an output device.

f.      If you want to play via Line-Out or Headphone out - please check their section on how to connect the output device then come back here.

g.    Lift the tonearm via the lift lever and move the tonearm head to the edge of the record

h.    Lower the tonearm by lowering the tone arm lift lever.

Note: the turntable platter will auto-start spinning once the tonearm is above the platter.

i.      Once the record is finished, the turntable platter will auto-stop. Lift the tonearm and place it on the tonearm rest. To listen to the B side of your record, flip the record and repeat the above from step 6.

i.    NOTE: Once finished listening to a record, make sure the stylus needle cover is re-attached to protect the stylus.

ii.    Do not try to adjust the balance weight or anti-skate while playing a record, this could break the stylus needle and scratch the record.

iii.    Do not try to turn the turntable platter manually. Moving or jarring the turntable without securing the tonearm could result in damage to the tonearm.

iv.    Re-secured the tone arm before transportation to protect the needle.

v.    Remove the balance weight before transportation to prevent damage or breakage to the unit.

a.    Power on the external Bluetooth® device first before turning on the BT function on the Turntable.

b.    Press the BT button on the turntable (MFB) to enable the unit to search the Bluetooth® device till BT indicator light becomes solid Blue. This will indicate that your devices are paired.

i.    NOTE: If the Turntable does not pair with your Bluetooth® device within 30 seconds, press the Bluetooth® search button again on the turntable and it should pair.

1. Press the Bluetooth button once to turn it on
2. Press the Bluetooth button again to activate pairing mode

• • When the pairing light goes solid, the turntable is paired with a Bluetooth device

• • Shift the dial below the “anti-skate” dial towards you

Support for both 33 and 45 RPM records, plus anti-scratch technology

Boasting premium audio quality, our Stir It Up Wireless Turntable offers an aesthetically pleasing, streamlined design with a warm, solid bamboo construction that is crafted using only Recyclable and Regrind Materials